Small Ground-Control Residuals Do Not Verify the Whole Elevation Model
A processing report can show small errors at ground-control points while a reader still has questions about elevations elsewhere. Those numbers describe a particular comparison, not automatic verification of every surface. Ask which points helped fit the model and which independent evidence was reserved to test the result.
Control and checking answer different questions
Agisoft’s Professional Edition 2.2 manual distinguishes points used to reference a model from checkpoints used to validate alignment and optimization results. This describes different roles for model fitting and validation; it does not establish that a particular project meets a mapping standard. Reusing a model-fitting point as the only evidence of accuracy does not provide the same independent test.
Read the locations as well as the summary number
Request a location diagram showing control, independent checks and the area used for the decision. Ask whether the intended area, elevation range and relevant surface conditions are represented by the assessment. Do not turn a point-per-area rule from a forum into a universal survey design. A reviewer should explain what the chosen distribution can support and which parts remain weakly tested; an overall average should not hide the location of a material discrepancy.
Keep reference and measurement uncertainty visible
Confirm coordinate reference, vertical reference, units, the source of surveyed coordinates and the uncertainty assigned to them. Ask what a reported residual represents and whether it is in image or ground units. Agisoft reports these as different entries. A discrepancy may require checking reference information, point identification, coverage or processing—not simply moving control points until a summary improves. Any revised result should retain its revision identity and the reason for the change.
Specify acceptance around the intended use
A visualization, quantity-support model and regulated survey can require different evidence and professional responsibility. Ask the provider to state the intended use, accuracy evaluation and exclusions in the deliverable. New England Drone Data offers scoped documentation and quantity-support records; this article does not make an engineering, boundary-survey or universal accuracy guarantee. Where the decision requires a licensed surveyor or design professional, identify that responsibility before relying on the model.
Copyable worksheet
Use one row for each field. Mark unknown information clearly and retain the original records.
| Field | Your note |
|---|---|
| Intended decision and accuracy requirement | ____________________ |
| Control versus independent check locations | ____________________ |
| Coordinate, vertical reference and units | ____________________ |
| Reported errors and reference uncertainty | ____________________ |
| Unsupported area and responsible acceptance reviewer | ____________________ |
Worked example
Illustrative example: a fictional team receives an elevation model with a small control summary. Before using an interior area for a quantity decision, it asks for independent checks and their locations. A material difference remains a review item rather than being dismissed because the points used to fit the model look good.